NPA Skawina NPA Skawina is part of the international Grupa Boryszew S.A. , a group operating in the metallurgical, chemical, and automotive industries. NPA Skawina operates in the aluminium industry since 1954 . The company was as an aluminium smelter first, and later transformed into the only Polish, and Central Europe's leading, manufacturer of aluminium wire rod and power conductors. The company employs about 180 workers.
History 1954 — Official start-up of the Plant on 20th July. 1980 — Electrolysis shutdown. Aluminium smelter is converted into a metallurgical plant. 2001 — Founding of Nowoczesne Produkty Aluminiowe. 2006 — Starting production of wire rod from a new type of aluminium alloy (Al. 59). Purchase and installation of modern machinery for the production of aluminium strands and wires. 2007 — Starting production of wire rod from a new type of aluminium alloy (AlZr). Continuation of the development of modern machinery and the development of production for niche items. 2012 — Merger of NPA Skawina S.A. and Boryszew S.A. A new company emerges under the name of Boryszew S.A. Oddział Nowoczesne Produkty Aluminiowe Skawina. 2013 — Purchase of equipment for the production of fine wires conductors for the automotive industry.
NPA Skawina range of products is divided into four groups: Wires Conductors Wires for conductor production and Bare overhead conductors and cable general purpose (from aluminium conductors (from aluminium and and aluminium alloys), lightning aluminium alloys). protection wires. Fine Wires Conductors Wire Rod Aluminium and alloyed wire rod for wires for the automotive sector, (wire and non-wire, for general wind farms, and others. purposes).
Production Rolling Department - 2 rolling lines with a total capacity of 40,000 tons of aluminium per year - the ability to manufacture wire rods with diameters between 7.6 mm and 19 mm - the ability to manufacture heat-treated wire rods (6 modern furnaces) Strengths Independence from wire rod supplies • The only wire rod manufacturing plant in Poland — batch for the production of wires and conductors Planning the product from the primary aluminium • Development of properties of wire rods and wires at the level of the liquid metal (primary aluminium), which gives the possibility to achieve above-standard properties of produced conductors Experience 60 years of experience in wire rod production
Production Conductors Department - modern machinery - 2 drawing lines producing wire - 2 highly efficient multi-platform multilayer twisting lines for overhead conductors to the maximum cross section of 1,200 mm2 - 2 lines for twisting conductors up to 240 mm2 - complete manufacturing machinery for multi-wire aluminium strands and fine wires conductors
Quality Quality Management System in the company complies with the requirements of ISO 9001:2008 , confirmed by the certificate we own issued by Bureau Veritas . NPA Skawina has a specialized laboratory fitted out with equipment to control chemical composition, and fulfil all the standard-required mechanical and electrical properties of our products. The laboratory operates in continuous mode allowing for rapid control of pre-production, intermediate, and finished goods. All our manufacturing processes are also subject to self-control by regularly trained and specifically delegated employees.
R&D Projects Cooperation with AGH OPIE Project 1.4 • scientific and technical support of the current activities of AGH University of Science in Kraków and Boryszew S.A. Title : “Increasing the energy efficiency of the network through the company, the development of innovative aluminium alloys for the Modern Aluminium Products Skawina (NPA Skawina), in production of overhead conductors” implemented under the view of a long-term and fruitful cooperation, signed on 30th • scientific training and development for company's Operational Programme Innovative Economy, 2007 – 2013. October this year a “Memorandum of Cooperation.” engineering staff, The scope of cooperation between AGH and NPA Skawina Priority 1. Studies in and the development of new • promotion of research and development. will include, among other things: technologies, Action 1.4. Support for special projects OPIE No. 01.04.00-12-301 • research and development in the field of continuous casting and rolling aluminium and its alloys, The total expenditure for the project (in PLN): 6,156,333.11 • research and development in the field of extrusion The total eligible costs (in PLN): 5,126,540.54 GEKON Project – results not available yet technology, The funding (PLN): 2,811,965.30 Title: “Reducing the transmission losses in 110 kV power • research and development in the field of production of Project period: 1st July 2014 – 31st December 2015 distribution lines through the development of innovative multi-wire products made of aluminium and it’s alloys , materials, construction, and manufacturing technology of • research and development of innovative products and low- loss overhead conductors.” technology of their production,
Skawina NOVA NPA Skawina wants to be a modern enterprise and business partner who understands the needs of its customers. Skawina NOVA project includes: • Research and development in the field of power lines aimed at ecology and reducing the cost of energy • Greater flexibility in production management for faster delivery • Commitment to customer projects through technical advice during the course of preparing the project and its implementation • Accepting a variety of financial solutions to increase the profitability of projects and better risk management • Raising the standards of qualitative research products offered for the energy sector • High standards of customer service aimed at reducing the formal burden of trading partners • Innovation and enterprise development in other areas
WE ARE LOOKING FORWARD TO DOING BUSINESS WITH YOU
More recommend
