Moulds & Cold Runner Blocks manufacturer for rubber injection
Since almost 15 years Dixence has been manufacturing nearly 300 cold runners
Currently we manufacture 1 cold runner / week 2 moulds / week
As you know we are not the only company to manufacture needle valve cold runners
Perhaps you unfortunately experienced it, it may happen that rubber twists around the needle, especially with natural rubber.
In order to solve the problem of injecting natural compounds.
We are the only one to put the rubber channel in parallel to the needle. major assets An extremely Reliable operating An easier maintenance Easily installed on any press
Facts instead words… We manufactured a 64 drops cold runner for one of our customers Thanks to that, the customer won 400g on the channels weight. We In 1 20 10 result 4kgs/hr took year shots/hr tons NR estimated 3 € /kg In 1 year savings = 60.000 €
In addition to that… customer won 30 seconds per cycle of 6 minutes Every hr 1 € per mn • 5 mns • 5 € /hr In 1 year savings = 25.000 €
Visit us at www.dixence.eu
Recommend
More recommend