Seatrec Summer 2017 Internship Review Huy Nguyen
San Jose, CA Cal Poly San Luis Obispo About Me Mechanical Engineering CSU COAST
Tube 1 0.16 0.14 Total % Oil Lost 0.12 Experiment 0.1 Results 0.08 0.06 0.04 Buna-Nitrile Oil Permeation 0.02 0 0 1 2 3 4 5 6 7 8 Week Tube 2 0.16 0.14 Total % Oil Lost 0.12 0.1 0.08 0.06 0.04 0.02 0 0 1 2 3 4 Week
Effect of % Oil on Freezing Point Experiment 11 Results PCM-Oil Mixtures 10 Freezing Temperature (°C) 9 Thermocouple resolution is only precise to 1°F and readings varied greatly depending on where in the 8 mixture temperature was measured. Luckily, a linear approximation seems to be appropriate as there should be no physical reason for higher order behavior. 7 6 0 2 4 6 8 10 % Oil by Mass
Main Project To design and build an improved demonstration device to more clearly show that a phase change material can accomplish work.
Idea #1: Pinwheel Channel PCM through a tiny peephole and turn a micro-waterwheel
Idea #2: Syringe Drive a rack-and-pinion using a PCM hydraulic piston
Idea #2: Syringe Drive a rack-and-pinion using a PCM hydraulic piston
Idea #2: Syringe Drive a rack-and-pinion using a PCM hydraulic piston
Idea #2: Syringe Drive a rack-and-pinion using a PCM hydraulic piston
Takeaways • Things almost never go right the first time. • Having curiosity and a willingness to ask questions is the quickest way to learn. • Work does not have to be the dull grind it is often made out to be.
Thanks!
Recommend
More recommend