PRESIDENTIAL DECREE 1586 THE PHILIPPINE ENVIRONMENTAL IMPACT STATEMENT SYSTEM Hiyas ng Bulacan Convention Center, Capitol Compound, City of Malolos, Bulacan September 23, 2019
ENVIRON RONMENTA ENTAL L MANAGEMENT MENT BUREAU U (emb) • Executive Order (EO) 192: [Sections 4 & 5] “ Providing for the Reorganization of Department of Environment, Energy and Natural Resources (DEENR) renaming it as the Department of Environment and Natural Resources (DENR), and for other Purposes ” • Section 16: Creation of the Environmental Management Bureau (EMB)
ENVIRONMENTAL MANAGEMENT BUREAU (emb) > VISION ION > MISSION SSION A nation empowered to protect our To restore, protect and enhance finite resources, attuned to the environmental quality towards pursuit of sustainable development, good public health, for a clean and healthy environment environmental integrity and that enhances the Filipino quality of economic viability. life for present and future generations
MAN ANDA DATE TES P.D. 1586: The Philippine Environmental Impact Statement (EIS) System of 1978 R.A. 8749: The Philippine Clean Air Act of 1990 R.A. 9275: The Philippine Clean Water Act of 2004 R.A. 6969: Toxic Substances and Hazardous and Nuclear Waste Control Act of 1990 R.A. 9003: The Ecological Solid Waste Management Act of 2000 R.A. 9512: Environmental Awareness and Education Act of 2008 Under E.O. 192, EMB is also mandated to provide research and laboratory services, and serve as secretariat in the adjudication of pollution cases.
ENVIRONMENTAL IMPACT STATEMENT SYSTEM OF 1978 (PD 1586) - Requires all government agencies, government-owned or controlled corporation and private companies to prepare an environmental impact assessment for all development projects and undertaking that will significantly affect the quality of the environment prior issuance of Environmental Compliance Certificate (ECC) by DENR - It is a planning tool ( environmental costs must be considered during the conduct of the Feasibility Study)
IMPLEMENTING RULES AND REGULATIONS > DAO 2003-30: “Revised Procedural Manual for the Implementation of the Philippine Environmental Impact Statement System(PEISS)” > EMB Memorandum Circular 2007-02: “Guidelines on the Screening for Coverage and other Application Requirements under the PEISS” > DENR Memorandum Circular 2010-14: “Standardization of Requirements in the Implementation of the PEISS” > EMB Memorandum Circular 2014-05: “Guidelines for Coverage Screening and Standardized Requirements under PEISS amending relevant portions of EMB MC 2007- 02”
ACRONYMS > ECPs – Environmentally Critical Projects (under Presidential Proclamation 1981-2146) > ECAs – Environmentally Critical Areas (under Presidential Proclamation 1981-2146) > EIA Report – Environmental Impact Assessment Report (in the form of an EIS) > IEE – Initial Environmental Examination > EPRMP – Environmental Performance Report and Management Plan > CNC – Certificate of Non-Coverage > EMP – Environmental Management Plan
PROCESS/PROCEDURE > SCOPING - Public Scoping (initial preparatory meeting with the host community[ies]) - Technical Scoping (presentation by the proponent to the Review Committee [RevCom] of the proposed project) > CONSULTATION/HEARING - Public consultation with the Stakeholders (Proponent & Review Committee Members) on the proposed Project to determine its Social Acceptability) > REVIEW - EMB convenes a Multi-disciplinary Experts to be member of the RevCom > MONITORING AND VALIDATION > APPROVAL/DENIAL
EMB Memorandum Circular 2014-05: “Guidelines for Coverage Screening and Standardized Requirements under PEISS amending relevant portions of EMB MC 2007- 02” > Section 1. Screening to determine coverage……….. - Categories of Project ( A to D) > Section 2. Standard requirements - Document requirements (EIS, IEE, IEE Checklist, EPRMP) - Responsible Office to Process (Central Office or Regional Office concerned) > Section 3. Repealing Clause
FOUR CATEGORIES OF ENVIRONMENTALLY CRITICAL PROJECTS
HEAVY Y INDUS USTRI TRIES ES - Non Ferrous rrous Metal l Industries tries - Iron and S Steel l Mills ls - Petroleum roleum and Petrochem rochemical ical Industries tries - Smel eltin ting g Plan ants 11
RES ESOURCE OURCE EX EXTRACTIVE ACTIVE IND NDUST USTRIES IES - Mining ng and Quarryin ying g Projects ts - Forest stry ry Project cts - Dikes s for/an /and d Fishpo hpond d Develo lopm pmen ent t Projects ts 12
INFR FRAS ASTRU TRUCTURE CTURE PROJECTS CTS - Dams - Power er Plant nts - Reclam lamation ion Project ects - Roads s and Bridges ges 13
GOLF LF COURSE RSE AND ND OTHER ER TOURISM RISM PROJECTS ECTS - GOLF LF COURSE RSE - RES ESORTS ORTS - OTHER ER LE LEISURE URE Projects ts 14
P ro jectsm ayrequireE ITH E Ran E nvi viro o nm n en ental talC C o o m plianc ance C C ertificat e cate O R C C e ertificate ateo o f f N o o n-C n C o o ve vera rage ge ,dependingo n thethres ho ldo rcapacity. 15
http://eia.emb.gov.ph/wpcontent/ uploads/2016/06/Revised- Table blet t proj oject ect Guidelines-for-Coverage- Screening-and- Show and explain your Standardized-Reqts.pdf web, app or software projects using these gadget templates. EMB Memorandum Circular 005 July 2014 16
Project Covered by PD 1586 - Office Buildings with a gross floor area of more than 10,000 square meters - Commercial Establishments with a gross floor area of more than 10,000 square meters - New Road Construction and Road Rehabilitations with a length of more than 2 kilometres - Cemeteries/Memorial Parks with a gross floor area of more than 10,000 kilometers
What is an ECC? A document issued by the DENR-EMB after a positive review of an application, certifying that the proposed project has complied with all the requirements of the Environmental Impact Statement System
Go to emb.gov.ph and click the link to ECC Online Application. 22
What is a Certificate of Non-Coverage (CNC)? It certifies that, based on the submitted Project Description Report, the project is not covered by the EIS System and is not required to secure an ECC. Further, the CNC advises the Proponent on coverage to other requirements by other DENR offices, LGUs or other government agencies. 23
Go to emb.gov.ph, then click the link to CNC Online Application. 25
Verify the coverage of the Project 26
Indicate the location of the project and project component 27
28
Determine the Project Category 29
30
Answer the four (4) questions 31
Apply for CNC 32
Fill-up the Project Information 33
Download and print the Order of Payment 34
Update the payment 35
Enter the Application Reference Number 36
Upload the receipt and valid ID 37
Track the status 38
Requi uirement rements of cnc cnc applica icati tion on Please Visit the ff site:-emb.gov.ph -http://119.92.161.13/projectchecker.aspx (For CNC application only) -Project Layout -Government ID -Bank Receipt 3 9
Requi uirements rements of ECC C applic icat atio ion -Proof of Compatibility with the existing Land Use Plan (zoning) -Proof of authority over the Project Site (Title, Lease or Contract, etc.) -Accountability Statement of Proponents (see attached form) and the preparation (if any, ff. annexes of revised procedural manual for DAO 2003-30) -Photographs of plates/Site Dev't Plan/Vicinity map of the project site showing impact areas and affected areas and communities. -Duly Accomplished Project Environmental Monitoring &Audit Prioritization Scheme (PEMAPS) Questionnaire (see Annex 2-7d of revised procedural manual for DAO 2003-30
Strea eamlin mlined ed En Environment mental al Impact ct Assessmen essment t Process - Fast tracked ECC Processing - 40 days - Environmentally Critical Projects (ECP) - 20 days - Non-ECPs - Seven (7) days CNC online processing - ECA and Industrial Mapping - Posting of ECC in the Internet and Online Project Screening for non-coverage
Thank you and have a good day! 43
Recommend
More recommend
