Poster presentation (core time: 9:00-11:30, July 28) In the session - PDF document

Poster presentation (core time: 9:00-11:30, July 28) In the session except for the Electronics and Information Technology, a short presentation will be made from 9:00 to 10:30. Chemistry and Materials (1) Chairperson: Ryota KONDO MC-P-01 Enhancement of impact properties via Vulcanized Natural Rubber latex blended with PP/wood Abstract composites Natchaya SIRIPORNAMART 1 , Hathaikarn MANUSPIYA 1 , Srichariya KACHORNVITAYA 2 , page 110 1 The Petroleum and Petrochemical College, Chulalongkorn University 2 The Union link Co,. Ltd MC-P-02 Preparation and electrocatalytic activity for ethanol oxidation of Pt-TiO 2 /graphene composite Abstract nanofibers for direct ethanol fuel cell application Tawanchay THUESOMBAT 1 , Kannanut SENEEKATIMA 3 , Rojana PORNPRASERTSUK 1,2 page 111 1 Department of Material Science, Faculty of Science, Chulalongkorn University 2 Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University 3 The Gem and Jewelry Institute of Thailand (Public Organization) MC-P-03 Deposition of YSZ thin films on powder-injection anode by electrophoretic deposition technique Abstract Sirima CHAUOON, Rojana PORNPRASERTSUK, Nutthita CHUANKRERKKUL, Malinee page 112 MEEPHO Department of Materials Science, Faculty of Science, Chulalongkorn University MC-P-04 Efficiency of TiO 2 coating on porous silica beads for degradation of cumene hydroperoxide Kamonwan PINATO 1 , Komkrit SUTTIPONPARNIT 2 , Withaya PANPA 3 , Supatra Abstract JINAWATH 4 , Dujreutai Pongkao KASHIMA 1,4 page 113 1 Research Unit of Advanced Ceramics, Department of Materials Science, Faculty of Science, Chulalongkorn University 2 PTT Research and Technology Institute (PTT RTI), Thailand. 3 Faculty of Industrial Technology, Thepsatri Rajabhat University 4 Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University MC-P-05 The study of improving tooling manufacturing quality by using risk management with TRIZ Abstract Ciping JIANG page 114 Industrial Engineering and Management, Cheng Shiu University MC-P-06 Absorption and desorption behaviors of strontium ion using alginate fiber Abstract Duangkamol DANWANICHAKUL, Tetsuya FURUIKE, Hiroshi TAMURA page 115 Department of Chemistry and Materials Engineering Kansai University

MC-P-07 Preparation of gel electrolytes based on natural polymers Abstract Ditpon KOTATHA, Tetsuya FURUIKE, Hiroshi TAMURA page 116 Department of Chemistry and Materials Engineering Kansai University Issues in dehydrogenation process of 2LiBH4-(1-x) MgH2-xAl composite (0 � x � 0.5) for MC-P-08 Abstract reversible hydrogen storage page 118 Sumiya SHIMADA, Ryota KONDO, Hiroyuki T. TAKESHITA Department of Chemistry and Materials Engineering Kansai University MC-P-9 Evaluationof Mg nucleation and growth process for mechanism clarification of incubation period Abstract in MgH 2 dehydrogenation Shintaro YUI 1 , Tatutaka AOYAMA 1 , Ryota KONDO 1 , Koji TANAKA 2 , Hiroyuki T. page 117 TAKESHITA 1 1 Department of Chemistry and Materials Engineering Kansai University 2 Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST) MC-P-10 Effect of grain boundary on hydrogenationcapacity of magnesium hydride Nobuaki YAMAMOTO 1 , Syunsuke SATAKE 1 , Koji TANAKA 2 , Ryota KONDO 1 , Hiroyuki T. Abstract TAKESHITA 1 page 119 1 Department of Chemistry and Materials Engineering Kansai University 2 Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST) MC-P-11 Effects of the amount of PVP and heat treatment conditions on the porosity of SiO 2 thin films Abstract prepared by PVP-assisted sol-gel method Yutaka EMI, Hiromitsu KOZUKA, Hiroaki UCHIYAMA page 120 Department of Chemistry and Materials Engineering Kansai University MC-P-12 Water-repellency, hardness and transparency of polyfluorocarbon-silica hybrid thin films prepared Abstract using polysilazane as silica source page 121 K. TAIRA, H. KOZUKA, H. UCHIYAMA Department of Chemistry and Materials Engineering Kansai University MC-P-13 Preparation of BiVO 4 photoanode films from aqueous solutions of metal salts with low-speed Abstract dip-coating technique page 122 Seishirou IGARASHI, Hiroaki UCHIYAMA, Hiromitsu KOZUKA Department of Chemistry and Materials Engineering Kansai University MC-P-14 Preparation of ceramic thin films on plastic substrates by sol-gel transfer technique: Effects of the Abstract thickness of release layer on the film formation and transferability. page 123 Kota NIINUMA, Hiromitsu KOZUKA, Hiroaki UCHIYAMA Department of Chemistry and Materials Engineering Kansai University

MC-P-15 Synthesis of thermoplastic materials from metal alkoxide solutions containing guaiacol Abstract Shinnosuke YAMAZAKI, Hiromitsu KOZUKA, Hiroaki UCHIYAMA page 124 Department of Chemistry and Materials Engineering Kansai University MC-P-16 Simultaneous formation of carbide and boride layers using B 4 C powder by spark plasma sintering Abstract method page 125 Chihiro NISHI, Akio NISHIMOTO Department of Chemistry and Materials Engineering Kansai University MC-P-17 Deposited and nitrided layer during active screen plasma nitriding Abstract Takahiro FUKUBE, Toshiya TANAKA, Akio NISHIMOTO page 126 Department of Chemistry and Materials Engineering, Kansai University MC-P-18 Organic secondary batteries using naphthazarin derivatives in the positive electrode: the effect of Abstract chloro-substituentson the electrode characteristics Shinji UMETANI 1,2 , Masaru YAO 1,2 , Hisanori ANDO 1,2 , Tetsu KIYOBAYASHI 1 , Nobuhiko page 127 TAKEUCHI 1 , Ryota KONDO 2 , Hiroyuki T. TAKESHITA 2 1 Research Institute of Electrochemical Energy, Department of Energy and Environment, National Institute of Advanced Industrial Science and Technology (AIST) 2 Department of Chemistry and Materials Engineering, Kansai University Adsorption of Cs + from aqueous solution using nanostructured titanate adsorbents MC-P-19 P. WEERACHAWANASAK 1 , Y. KAKUTANI 2 , A. SAKO 2 , M. SANO 2 , T. SUZUKI 2 , T. Abstract MIYAKE 1, 2 page 128 1 The Organization for Research and Development of Innovative Science and Technology, Kansai University 2 Faculty of Environmental and Urban Engineering, Kansai University Chemistry and Materials (2) � Chairperson: Akifumi KAWAMURA MC-P-20 Creating carbon dioxide adsorption layer on polydivinybenzene (DVB) HIPE surface by Abstract Layer-by-Layer technique Jitima PREECHAWONG 1 , Jirasuta CHUNGPREMPREE 1 , Pornsri SAPSRITHONG 2 , page 129 Stephan T. DUBAS 1 , Manit NITHITANAKUL 1 1 The Petroleum and Petrochemical College, Chulalongkorn University 2 Division of Polymer Engineering Technology, Department of Mechanical Engineering, College of Industrial Technology, King Mongkut’s University of North Bangkok MC-P-21 Development of a novel laser-triggered drug-delivery-system using polymer micelles and Abstract Au-nanoparticles for skin cancer treatment page 130 Anna HART, Rachel KRESS Center of Materials for Information Technology, Department of Chemistry, University of Alabama Department of Inorganic Chemistry, Albert-Ludwigs-Universität

MC-P-22 A simple 8-amidoquinoline derivative as a turn-on fluorescent sensor for detection of Zn (ll) and Abstract Cd (ll) ions. page 131 Atchareeporn SMATA, Mongkol SUKWATTANASINITT Nanotec-CU Center of Excellence on Food and Agriculture, Department of Chemistry, Faculty of Science, Chulalongkorn University MC-P-23 Layer-by-layer modification of non-woven fabric with humic acid for the removal of heavy metals Khine Myat OO 1 and Stephan Thierry DUBAS 1, 2 Abstract 1 The Petroleum and Petrochemical College, Chulalongkorn University page 109 2 Center for Petroleum, Petrochemicals, and Advanced Materials, Chulalongkorn University MC-P-24 Dialdehyde microcrystalline cellulose (DAC) generated from sugarcane bagasses- induced Abstract periodate oxidation Reaction page 132 Satita THIANGTHAM, James RUNT, Hathaikarn MANUSPIYA The Petroleum and Petrochemical College, Chulalongkorn University MC-P-25 Biodegradable injectable polymer formulation exhibiting temperature-responsive sol-gel transition Abstract for instant use at clinical scene Yasuyuki YOSHIDA 1 , Akinori KUZUYA 1,2 , Yuichi OHYA 1,2 page 133 1 Department of Chemistry and Materials Engineering, Kansai University 2 The Organization for Research and Development of Innovative Science and Technology, Kansai University MC-P-26 Development of biodegradable injectable polymer formulations forming chemical cross-linkings Abstract in response to temperature Keisuke KAWAHARA 1 , Yasuyuki YOSHIDA 1 , Akinori KUZUYA 1, 2 , Yuichi OHYA 1, 2 page 134 1 Department of Chemistry and Materials Engineering, Kansai University 2 The Organization for Research and Development of Innovative Science and Technology, Kansai University MC-P-27 Preparation of biodegradable hierarchical tubular structures by electrospinning for regenerative Abstract blood vessels Kazuki NISHIMURA 1 , Akinori KUZUYA 1,2 , Atsushi MAHARA 3 Tetsuji YAMAOKA 3 , Yuichi page 135 OHYA 1,2 1 Department of Chemistry and Materials Engineering, Kansai University 2 The Organization for Research and Development of Innovative Science and Technology, Kansai University 3 National Cerebral and Cardiovascular Center