MS S Mega gades des Nov ovo
MS Megades Novo A powerful wide spectrum disinfectant! MS Megades Novo is a universal disinfectant for use in animal housings and disinfection baths. • Powerful foaming disinfectant • Wide spectrum of activity against bacteria, yeasts, fungi, viruses • Pleasant smell • Does not cause discoloration to the surface • Non corrosive • Reaches deep into the pores • Effective in the presence of a fatty residue or organic matter
Preparation prior to disinfection • Prior to disinfection the surface needs to be thoroughly cleaned • Cleaning removes 95% of all dirt including micro- organisms • A clean surface requires the minimum dosage of disinfectant with the maximum effect
Disinfection • Oxidizing agents (reaction with oxygen) Group of active ingredients to which Iodine, Chlorine, Hydrogen Peroxide, Peracitic acid and Chlorine-dioxide belong Very broad spectrum, low temperatures, quick acting, sensitive to fouling, poor stability, no resistance of micro-organisms • Non-oxidizing agents Group of active ingredients to which Formaldehyde, Gluteraldehyde and Quaternary ammonium compounds belong Broad spectrum, low temperature failure, slower acting, high fouling tolerance, rel. high stability, for some substances resistance possible when concentrations are not applied correctly MS Megad ades es Novo is a non-oxidiz oxidizing ing disin infec fectan ant
Content Glutaraldehyde: Gluteral (150 grams per litre) • A disinfecting agent from the range to which Formaldehyde also belongs. The mechanism is the same for both: Destruction of cell proteins of especially micro-organisms • Glutaraldehyde does not have the carcinogenic suspicion of Formaldehyde, a far higher boiling point (not active in gas phase) and less toxicity. It enables us to have a strong acting, broad spectrum and high fouling resistant agent. Highly hly effect ective ive microbio obiocid cidal al subst bstan ance ce
Glutaraldehyde versus formaldehyde Characteristic Formaldehyde Glutaraldehyde Chemical name Methanal Glutardialdehyde 1,5-pentandial CAS Number 50-00-0 111-30-8 Formula structure CH ₂ O C ₅H₈O₂ H-CHO OHC-CH2-CH2-CH2-CHO Molecul weight Melting point -117 ⁰C -14 ⁰C Boiling point -19 ⁰C 118 ⁰C Odour Irritating smell Sharp smell MAK value 0,5 ppm 0,1 ppm Danger 8-toxic 6.1 LD50-value (Rat-oral) 100 mg/kg 134 mg/kg
Content Quarternary Ammonium Compounds (100 grams per litre) • Quats are surfactants. Normally surfactants are used to lower surface tension and improve penetration. Here the Quat is also disturbing the cell membrane and kills the micro-organism. Quats also adhere rather well to surfaces. Even performing better together with the aldehyde. • Quats are widely used against algae Surfac actant tant and microbi obiocida ocidal substan stance ce in synergism rgism
Effectivity • Bacte cteria ria : Enterococcus hirae, Proteus vulgaris, Pseudomonas aeruginosa, Staphylococcus aureus, Bacillus cereus, Enterococcus faecalis, Escherichia coli, Helicobacter pylori, Listeria monocytogenes, Salmonella typhomurium, Vibrio cholerae, Haemophilus equigentalium, Campylobacter jejuni, Clostridium perfringens • Viruses uses : Egg drop syndrome, infectious pancreatic necrosis, respiratory disease complex, chicken anaemia, viral diarrhoea, infectious bovine rhinotracheitis, aujeskys, Newcastle disease, Bovine Pneumonia, Parvoviral enteritis, Enteritis, Teschen Talfan disease, Porcine Blue Ear / PRRS • Fungi gi : Candida Albicans, Aspergillus Brasilliensis, Pseudomonas aeruginosa, Proteus vulgaris, Staphylococcus aureus, Enterococcus hirae, Pseudomonas aeruginosa, Aspergillus fumigatus
MS Megades Novo • Not affecting slurry pit and/or biogas installations when applied correctly • Superior wetting performance and surface penetration due to special blend of surfactants • Available with detailed risk assessment • Non oxidizing agent and therefore stable formulation and safe for all materials
Application • Not corrosive and absolutely neutral on materials and therefore applicable for stables and similar • Also applicable combating algae fouling on surfaces • Because of high fouling compatibility ideal for rough and porous materials (wood, concrete, a.o.) • Easy to apply in foam and spray systems
Application
Recommend
More recommend
