Fall Protection RMMMA Members
Our First Walkway
First Walkway Finished Product
Fuel Tank Modification Part 1
Fuel Tank Modification Parts 2 Added Fuel Capacity (40 gallons)
Tank Mod Finished
Skid Tape and Slots Cut to see Ripper
Step
Dozer Tie Off
D Ring Front Tie Off
Top View
D8
Slots
Dozer With Rear Window Guard
D8N Finished
D7 Tank Mod With a Camera
Rear Veiw Camera From Brake Supply
D Ring on the Cab
First Attempt at Fall Prevention
637E Railing
Mounting to the Cab Skin
637E Rear Tie off Cable
Track Hoe
D Ring Tie Off’s
D Rings
8 D Rings on our 637’s
Blade Guarding
Blade Access
D11 Guarding
D11R Full View
Labeled Tie off Points
Scraper Tie Off
Tom Will Explain
More for Tom
Tom’s
Tom’s
Another D11R
Nice Over the Hood Tie Off
Another View
Pull Tester
Don’t forget the Recovery System And the Recovery Plan and Training
637G Before access Improvement
637G Access and Egress Modification
Finishing the Welding
Finished Platform
Finished Project
MSHS regulation • Subpart M • Machinery and Equipment • .14130 Roll-Over Protective Structures • (2) Alterations or Repair on ROPS shall be performed only with approval from the ROPS manufacturer or under the instruction of a registered professional engineer with knowledge of and experience on ROPS design. The manufacture or engineer shall certify that the ROPS meets the applicable performance requirements
Engineering Company the Certified all our Modifications • Consolidated Engineers Inc • 316 S Gillette Avenue • PO Box 1035 • Gillette, WY 82716-1035 • Phone: (307) 682-0768 • Edward S. Scott P.E. • escott@ceincorp.com
HD Steps Hand Rail Was Also Added.
HD Rear Steps
Work Platform
Cab Access
637 Hitch Rebuild
637G Hitch Rebuild.
Our New Drill Truck
Recommend
More recommend
